The Carrier Weathermaker 9200 gas furnace is not currently manufactured by the company; the last listing of the product from Carrier is dated 2001. The Weathermaker 9200 can achieve an AFUE of 95.5 percent and features two heat exchangers to obtain maximum heating from the fuel consumed. The Weathermaker 9200 is part of the same series as Carrier’s 58 MCA and Weathermaker Infinity. Using the air from outside for combustion and venting, the Weathermaker 9200 is equipped with various safety and efficiency features. The furnace uses an automatic ignition system instead of a pilot flame that stays on continuously.
Furnace Filters for the Carrier WeatherMaker 9200
|Air Flow Configuration||Cabinet Width||Filters|
|All||17-1/2″||1 16x25x1 filter|
|All||21″||1 20x25x1 filter|
|All||24-1/2″||1 16x25x1 filter|
WeatherMaker 9200 Warranty
Carrier offers a lifetime limited warranty on the heat exchanger in the Weathermaker 9200, and a 5-year parts limited warranty.
Carrier WeatherMaker 9200 Model Numbers
The WeatherMaker 9200 is available in different models which vary in efficiency and capacity.
|Model Number||AFUE||BTUs per Hour|
These blinks represent the fault/error code for the furnace. This will provide an explanation of the error code:
– Red light 1 on continuously means furnace is operating in emergency heat.
– Red light 2 on continuously means the microprocessor board has malfunctioned.
– Yellow light on continuously means furnace is operating in high heat.
Green light on continuously means furnace is operating in low heat.
– The status codes are a 2 digit number. The first digit is determined by the number of flashes of the yellow light and the second digit is determined by number of flashes of the green light.
An error code 31 refers to a malfunction related to the pressure switch, which is a safety device to ensure proper flow of either air or water through the furnace (depending on the type of heating medium). If the pressure is incorrect the switch cuts power to the entire furnace thereby preventing risk of fire and/or extreme damage to the furnace.
According to the diagnostic notes for the Carrier Weathermaker 9200, red light 1 on continuously means furnace is operating in emergency heat and red light 2 on continuously means the microprocessor board has malfunctioned.
A fault code of 14 or 34 refers to an ignition lockout or ignition proving fault. You can find a list of the unit’s fault codes and their descriptions on page 9 of your user manual.
Error code 13, which is a limit circuit lockout. It is also related to an error code 33, which is a limit circuit fault. What this second one means is that you my have an excessively dirty filter, blocked vent, faulty blower motor, or some other issue that is affecting airflow into and through the furnace. To learn more you can read the owner’s manual here.
Questions about this model?