American Standard Freedom 80 Furnace Overview

The Freedom 80 furnace has models that can be found in American Standard’s Silver Series, Gold and Platinum series. This furnace offers up to 80 percent AFUE and can be either a single-stage, two-stage or variable-speed gas-fired furnace.

The Freedom 80 is manufactured in a variety of 2- to 5-ton units with heating capacities ranging from 32,000 to 113,000 BTU/H. The series can be configured in upflow/horizontal or downflow/horizontal positions.

This model features a multi-speed blower motor for quiet, efficient operation and an insulated steel cabinet for increased unit protection and heat retention. Additional components include increased humidity control (with select models), induced draft venting, a silicon nitride hot surface igniter, in-shot burners, a self-diagnostic control system and an aluminized heat exchanger.

Furnace Filters for the American Standard Freedom 80

Air Flow Configuration	Cabinet Width	Filters
Upflow / Horizontal	16-1/2″	1 16x25x1 filter
Upflow / Horizontal	19-1/2″	1 17x25x1 filter
Upflow / Horizontal	23″	1 20x25x1 filter
Upflow / Horizontal	26-1/2″	1 24x25x1 filter

Questions about this model?

Consumer Reviews of American Standard Freedom 80

2.3

2.3 rating
6 reviews

Very Satisfied
2
Somewhat Satisfied
0
Neutral
0
Somewhat Unsatisfied
0
Very Unsatisfied
4

#3 of 7 American Standard Furnace
33.33% of customers recommended

Write a Review Read Reviews

Read Reviews of Other American Standard Products

Find ratings and reviews for American Standard Air Conditioners, Heat Pumps and more

Read Reviews

Top 10 Furnaces

See who made our list of the best Furnaces of 2022.

See the Top Products

Find a Certified Heating & Cooling Professional In Your Area

Contact a top-rated local expert to help with all of your home's HVAC needs.

Write a Review

"Freedom 80 is garbage"

Very Unsatisfied

I live in LA, which means I need to run the furnace maybe one month out of the year to keep the house comfortable. And yet this furnace never has worked properly. Whether its a bad “call for heat,” or a bad high limit sensor, it never wants to supply heat. Already had three service calls from the guys who installed it, and even they are mystified, but they still charge $150-200 each time for the service call. Sometimes in the middle of the night, the furnace will work for 10 minutes, then the heat cuts out and just blows cold air until I wake up and realize the house is freezing and I trudge to the garage to unplug the damn thing for the rest of the winter. We are staying warm with electric blankets, space heaters and sweaters, but our house is a consistent 58 degrees at night. At least we’re saving on our utility bill.

San Pedro, CA

01-16-2012

Other Freedom 80 Reviews

The Freedom 80 appears to be well received by reviewers across the web. Review sites such as webhvac.com state this is a solid, basic model that will provide dependable performance. Gasfurnaceguide.com also mentions that this model is a good option for homeowners looking for a budget-friendly solution to efficient heating in a moderate climate.

While most posters recommend this model in online reviews, contractors on gardenweb.com do not advise selecting this unit for use in colder weather climates. Instead, they direct homeowners to a higher efficiency unit for maximum savings.

In addition, homeowner forums such as doityourself.com report several system failures. Bad parts, hard to read error codes and having the system improperly the home, or not heating at all, are among the issues stated.

Questions and Answers

Question:

Why is a red light blinking on my American Standard Freedom 80 furnace?

Answer:

If you are getting a steady blinking light, it means the furnace is functioning properly. If it blinks in a series of flashes and pauses, this is an error code indicating

that something is wrong. A list of error codes and their meanings should be located on the inside front panel of your unit.

Question:

How do I find model / serial number for the Freedom 80?

Answer:

On 2014-12-09 Danielle wrote:

To find the serial number on the American Standard Freedom 80 try looking either on the sides of the interior sheet metal housing or on the shelf below the burners.

American Standard Freedom 80 Model Numbers

The Freedom 80 is available in different models which vary in efficiency and capacity.

Model Number	AFUE	BTUs per Hour
ADD040R924F*	80	40,000
ADD060C924F*	80	60,000
ADD060C936F*	80	60,000
ADD060R936F*	80	60,000
ADD060R9V3F*	80	60,000
ADD080C936F*	80	80,000
ADD080C945F*	80	80,000
ADD080R936F*	80	80,000
ADD080R9V3F*	80	80,000
ADD100C945F*	80	100,000
ADD100C954F*	80	100,000
ADD140C960F*	80	140,000

Freedom 80 Warranty

The Freedom 80 furnace is equipped with either a lifetime or 20-year limited warranty for the heat exchanger, depending on which model is selected, and a 10-year limited warranty on all other remaining parts. The furnace must be registered within 60 days of installation or the warranty term decreases to American Standard’s base warranty coverage.