Find Local Contractors

1. I need a new:

2. My zip code is:

Payne PG9M Furnace

3.0 of 5 stars 2 reviews | #4 of 5 Furnaces
Updated: Apr 4, 2018 | Read more about Payne Furnaces | PG9M Warranty

Overview of PG9M

Payne Heating and Cooling was founded in 1914 and carries a range of residential cooling and heating products. The Payne PG9M gas furnace is still sold today and the features include:

  • A multipurpose design to allow downflow, upflow or horizontal installation
  • Quiet start up as well as a smooth operation
  • Hot surface ignition
  • Aluminized-steel primary heat exchanger
  • A galvanized steel cabinet
  • A blower cooling relay standard as part of the electronic control center
  • The heat exchanger has a Polypropylene-laminated condensing feature

Furnace Filters for the Payne PG9M

Air Flow Configuration Cabinet Width Filters
All 17-1/2" 1 16x25x1 filter
(side air return)
1 16x25x1 filter
(bottom air return)
All 21" 1 16x25x1 filter
(side air return)
1 20x25x1 filter
(bottom air return)
All 24-1/2" 2 16x25x1 filters
(side air return)
1 24x25x1 filter
(bottom air return)

Consumer Reviews of the PG9M

3.0 3.0 of 5 stars 2 reviews
  • Very Satisfied
  • Somewhat Satisfied
  • Neutral
  • Somewhat Unsatisfied
  • Very Unsatisfied
best product icon  What are the 10 Best Furnaces?
Compare to Other Payne Furnaces:
1 of 5 stars Vancouver, B.C. Canada
Date created: 2016-11-09

Stay away from Payne/Carrier/Bryant

Stay away from Payne/Carrier/Bryant product, they are all made by the same company. We installed our furnace in fall of 2009. In October of 2016 (7 years later) the secondary heat exchanger cracked. We did not have carbon monoxide detectors but my Wife had noticed a strange smell in the house. The cracked secondary heat exchanger was a factory recall and they replaced the part, but we were still on the hook for over $1000.00 in labour. Three weeks after that we now sit in our cold house and it turns out the computer board in the furnace needs to be replaced. This is going to cost us $600.00. They make garbage, stay away.

5 of 5 stars WI
Date created: 2009-11-24

Four Payne Furnaces in 2008

I had four (4) Payne pg9m furnaces installed in the summer of 2008. They went through the 2008/2009 winter without any problems. I am in wi, (in 'light' heating season now) without any problems so far.

Other PG9M Reviews

Question and Answer


What is an error code 13?


Error code 13 is a limit or flame rollout switch lockout. This can be caused by a number of problems, including a dirty filter, a problem with the switch, or the burners.

Find Local Contractors
1. I need a new:
2. My zip code is:

Payne PG9M Model Numbers

The PG9M is available in different models which vary in efficiency and capacity.

Model Number AFUE BTUs per Hour
PG9MAA024040 92.1 40,000
PG9MAA024060 92.1 60,000
PG9MAA036060 92.1 60,000
PG9MAA036080 92.1 80,000
PG9MAA048100 92.1 100,000
PG9MAA060120 92.1 120,000
PG9MAA060140 92.1 138,000

PG9M Warranty

The first thing that the owner will need to do is register the product within 90 days of installation on the Payne Registration page. Registration can also be completed by calling 1-888-417-2963.

Payne will cover the furnace against faults due to workmanship or material defects. The furnace must be operating under normal conditions for this aspect to apply.

Warranty to the original purchaser in a single family home will cover 10 years from the installation date (Five years if the product is registered after 90 days). The heat exchange is covered for 20 years.

Copyright 2002 - 2019