NY Thermal Trinity Tx Boiler
Updated: Jul 17, 2018Write a review
Read more about NY Thermal Boilers
Overview of the Trinity Tx
The NY Thermal Trinity Tx is a high efficiency stainless steel gas boiler. The Tx has a 94% AFUE and is Energy Star rated. It features a wall-mount configuration with an optional floor stand. Models of the Tx range from 57,000 to 199,000 BTU/hr. and two of the models are available in a combi boiler version. All components are quick-release type and the unit comes pre-wired for use with an indirect water heater. The Tx has a fully modulating combustion system, and all water connections are located at the bottom of the unit. Venting is available up to 150 feet on most models, with 2-inch venting on most models up to 100 feet.
Date created: 2018-07-17
Name: Patrick Schmidt
"Mechanically great, logic interface poor"
The Trinity Tx51 was the smallest boiler I could find for my small house. Mechanically, it's been perfect after 2 and a half years of operation. However, the logic and control portion has been poor. The logic board had to be replaced twice (thankfully while under parts and service warranty), as it developed an error which locked out the boiler in winter. Also, the interface had to be replaced due to an inoperable button. This was covered by the parts warranty, not the service warranty.
Trinity Tx Warranty
The Trinity Tx is covered by a 5-year warranty on defective components from the date of manufacture or 1 year from the date of installation, whichever period is longer. There is a pro-rated lifetime extended pressure vessel warranty after the first year of installation. The boiler must be registered within 1 year of installation to qualify for the extended pressure vessel coverage. The warranty does not cover labor or shipping costs. The warranty is to the original owner and location and is not transferable.