Consumer Reviews of Payne furnaces

Read more about Payne furnaces

Read reviews of other Furnace brands

Write a review

1 2 Next >>

---

Date created: 2012-09-08 Name: MASTER TECH
Location: unionville,ny

Satisfaction Rating:
Review:
"HVAC-R TECH"
This is for everyone out there ... 98% of everyone's problem is from poor planning and poor installation,,,improperly trained employees,employees that don't care, or poor mind set,(get in,get out,as fast as u can)this has been a big problem in the hvac industry and the manufacturer takes the blame, almost every furnace is pre ran and fully tested before its shipped out to supply houses. Most of my service calls is due to improper installs by other company's, not taking other considerations into mind when INSTALLING (I.E..duct sizing, proper voltage, amps, correct wiring, proper pitch for draining, proper air speed, proper exhausting).THESE things will have a major effect on heating and a/c,you don't just pull your old furn, out and drop a new one in,its not that simple, question everything about your service tech, and have them back up what they say (no options)just the facts... your money and satisfaction cannot be compromised.

---

---

Date created: 2012-07-10 Name: M. Guy
Location: Massillon, OH

Satisfaction Rating:
Review:
"Great Furnace"
I bought my first house in September 2004 and had to replace the furnace that coming winter. A friend of the family recommended and installed a Payne furnace because of the reliability and price. I have it checked every year and I have not had an issue with it. This is why I also selected a Payne when it was time to replace my air conditioner in 2010. With regular maintenance, I have not had an issue with either and I would definitely select Payne again.

---

Date created: 2012-04-30 Name: AAD
Location: Pittsburgh, PA
Years owned: 14

Satisfaction Rating:
Review:
"Low Maintenance"
Our Payne furnace has been great for us. It is a 92% efficiency model with a 2 1/2 ton blower. It is heating a 3 story ~1400sqft home, and our bills are typically under or around 200$ per month during the coldest months (-5* to 20* lows). We have only put about 50$ in maintenance into this furnace since we've move into our home 6 years ago, which ended up to be nothing mechanically with the furnace, but a clogged condensation box. Last year, we had a 2 1/2 ton Lennox A/C installed into our Payne furnace and both have been operating perfectly.

---

Date created: 2012-02-24 Name: Paco
Location: Waterloo, ON
Years owned: 1

Satisfaction Rating:
Review:
"Payne is great!"
Despite all the bunk I've read about Payne furnaces in other reviews, they really are very good. I recently had one installed, and my gas bill dropped $30 in one month (and this is as winter was just starting to pick up). It runs quiet, and my humidity even dropped from over 60% to below %50. Talk about two birds with one stone. I also read elsewhere that a furnace will only work properly if it is installed properly. If you are in Kitchener-Waterloo area, I recommend Shillco Mechanical. They were really awesome, and checked up on us a couple times already to make sure everything running good. Cheers to all.

---

Date created: 2011-11-18 Name: AJR
Location: Winnipeg MB
Years owned: 2

Satisfaction Rating:
Review:
"on my third furnace"
I have two rental properties and I have replaced the furnace in them plus my own home with Payne condensing furnace. I have not had any problems with any on them. I am either very lucky, or the reports of the Payne furnace being junk are incorrect. If I need another furnace in the future, I will definitely consider a Payne.

---

Date created: 2011-08-08 Name: R.P.
Location: MN.

Satisfaction Rating:
Review:
"All the same product"
I see people saying they would rather have the Bryant and Carrier parts installed on the Payne. Guess what! They are the same Carrier and Bryant parts. Payne last just as long as any other brand and I would still put in a Payne been doing it and installing them for long time now.

---

Date created: 2011-03-29 Name: R Eccher
Location: Renton, WA

Satisfaction Rating:
Review:
"Didn't know the brand name until it died"
We bought a brand new tract house 28 years ago and it never occured to us to check what brand of furnace came with the home. It turns out that it was a PAYNE. We never had an issue with it until yesterday when it finally quit. I never knew until today that you are supposed to have them serviced regularly - I never had it checked once! It's never a good time for a furnace to go out but I can't complain after 28 years. Now that I have begun looking at all of the top brands, it seems like not many people are happy with any of them. I guess I will just save a few bucks and roll the dice on another PAYNE.

---

Date created: 2010-10-08 Name: T Blehovde
Location: Oconomowoc,WI

Satisfaction Rating:
Review:
"Consumer"
I had a Payne Furnace and Air Conditioner installed 8 years ago and I am very Happy with both of them.I would buy again for sure.

---

Date created: 2009-11-24 Name: J. Smith
Location: WI
Years owned: 1

Satisfaction Rating:
Review:
"Four Payne Furnaces in 2008"
I had four (4) Payne pg9m furnaces installed in the summer of 2008. They went through the 2008/2009 winter without any problems. I am in wi, (in 'light' heating season now) without any problems so far.

---

Date created: 2009-10-02 Name: Rob
Years owned: 4

Satisfaction Rating:
Review:
"Payne A/C review"
I have had a a Payne a/c unit for more than four years with not one problem and I would recommend it to anyone. Installation quality makes all the difference!!

1 2 Next >>

The opinions expressed in these reviews are the opinions of consumers that submitted reviews to FurnaceCompare.com. They do not necessarily represent the opinions of FurnaceCompare.com.